Ground-Based Study of Gravity Effects on Flow Boiling Heat Transfer in Preparation for an ISS Flight Experiment

PI: Jungho Kim, University of Maryland - College Park

The use of two-phase thermal systems on spacecraft has been greatly hampered by the inability to predict with sufficient confidence their performance at various gravity levels (Earth, Mars, and lunar gravity and low-g). The performance prediction of two-phase systems under these conditions requires a sufficient heat transfer database and reliable models, both of which are not currently available. Although some research in low-gravity adiabatic flows has been performed, very little heat transfer data relevant to advanced space heat exchangers is available and the mechanisms by which heat is removed from the surfaces under varying gravity environments are unclear. Using parabolic flight as a relevant environment, We will develop the data and models needed to predict the behavior of two-phase flows in geometries relevant to advanced heat exchangers in variable gravity environments throughout the boiling curve in low-g, 1-g, and high-g (1.6g).

This work is a continuation of flight testing under T0005. Further work continues under T0190.

Paper (October 2017): Phase-Change Heat Transfer Measurements Using Temperature-Sensitive Paints

Technology Areas (?)
  • TA03 Space Power & energy Storage
  • TA06 Human Health, Life Support and Habitation Systems
  • TA14 Thermal Management Systems
Problem Statement

Most existing spacecraft thermal subsystems rely on single-phase heat transfer, but the drive towards lighter, smaller, higher power subsystems to make future missions possible will require use of two-phase thermal systems. The key challenge in developing two-phase thermal systems is the development of a heat transfer database and reliable models for flow boiling in variable gravity environments from which the performance of two-phase heat exchangers in spacecraft can be confidently predicted. Unlike previous work where only time- or space-averaged heat transfer data were measured, we will obtain local measurements of the wall heat transfer coefficient with high temporal and spatial resolution using infrared (IR) camera and an IR transparent silicon tube.

Technology Maturation

Test conditions include bubbly flow, slug flow, churn flow, annular flow, inverse annular flow, and ultimately dryout. Flow visualization is also performed. At the end of the test campaign, we expect to have completed a preliminary overview of the test matrix for a future ISS experiment. The TRL level is currently 4, and is expected to exit at 4 as well.

Technology Details

  • Selection Date
    REDDI-F1-16 (Jul 2016)
  • Program Status
  • Current TRL (?)
    Successful FOP Flights
  • 2 Parabolic

Development Team

Web Accessibility and Privacy Notices Curator: Alexander van Dijk Responsible NASA Official: Stephan Ord Last Update: November 16, 2018