Flight Opportunities - Tech Portfolio

Showing 34 technologies Browse All »

Code # of Completed Flights

T0301-S
Lander-style Vehicle Plume-structure Heat Transfer Monitoring Knowledge Payload

PI: Steven Collicott, Purdue University
- 4 sRLV
T0280-P
Zero-G Technology Demonstration of Low-Cost Three-Axis CubeSat Attitude Control with Hard Disk Drive Reaction Wheels

PI: Stephen Robinson (2), University of California - Davis
- 3 Parabolic
T0293-P
Evaluation of Computed Axial Lithography for rapid, volumetric additive manufacturing under low-gravity conditions

PI: Hayden Taylor, University of California - Berkeley
- 3 Parabolic
T0304-S
Deployment Test for ExoCam Module Lunar Lander Descent Imaging

PI: Jason Mezilis, Zandef Deksit Inc.
- 3 sRLV
T0277-PS
Propellant Gauging During On-Orbit Refueling and Transfer Operations

PI: Kevin Crosby, Carthage College
- 2 Parabolic
- 0 sRLV
T0278-P
Testing a Novel Technology for a Key Material Property Measurement- Application to Advanced Manufacturing in Space

PI: Ranga Narayanan, University of Florida - Gainesville
- 2 Parabolic
T0279-P
Flight Testing of a Microfluidic Biochemical Analysis Lab-on-a-Chip

PI: Richard Mathies, University of California - Berkeley
- 2 Parabolic
T0283-P
Reduced Gravity Experiments to Advance CFD Boiling Models for Cryogenic Fluid Management Systems

PI: Emilio Baglietto, Massachusetts Institute of Technology
- 2 Parabolic
T0297-B
Enabling Low-Cost, Autonomous Recovery of Small Payloads from Low Earth Orbit

PI: Tyler Kunsa, SpaceWorks Enterprises, Inc.
- 2 Balloon
T0275-P
Microgravity Test of Autonomous Multiple Cycle Farming System

PI: Hamidreza Najafi, Florida Institute of Technology Inc.
- 1 Parabolic
T0281-P
Enhancing Sub-orbital Tech Advancement through Automated Control of High-def Video Systems

PI: Steven Collicott, Purdue University
- 1 Parabolic
T0284-P
Glass Alloy Manufacturing Machine - Acoustic Levitation Furnace (GAMMA-ALF)

PI: Alicia Carey, Redwire (Formerly Made in Space, Inc.)
- 1 Parabolic
T0286-P
Autonomous Robot Swarms for Lunar Orbit Servicing and Space Asset Assembly

PI: Joseph Paradiso, Massachusetts Institute of Technology
- 1 Parabolic
T0287-P
Preparations for a Suborbital Evaluation of a Human Tended Surgical Fluid Management System

PI: George Pantalos, University of Louisville
- 1 Parabolic
T0289-B
CubeSounder: Flying a Novel 3D Weather Imaging Sensor on a High-Altitude Balloon

PI: Sean Bryan, Arizona State University
- 1 Balloon

« Previous
1
2
3
Next »

Parabolic (22)
sRLV (11)
Balloon (2)

< All Status

Active (34)

< All Selection Dates

TechFlights20 (Sep 2020) (34)

TA05 Communication and Navigation (1)

Lander-style Vehicle Plume-structure Heat Transfer Monitoring Knowledge Payload

Zero-G Technology Demonstration of Low-Cost Three-Axis CubeSat Attitude Control with Hard Disk Drive Reaction Wheels

Evaluation of Computed Axial Lithography for rapid, volumetric additive manufacturing under low-gravity conditions

Deployment Test for ExoCam Module Lunar Lander Descent Imaging

Propellant Gauging During On-Orbit Refueling and Transfer Operations

Testing a Novel Technology for a Key Material Property Measurement- Application to Advanced Manufacturing in Space

Flight Testing of a Microfluidic Biochemical Analysis Lab-on-a-Chip

Reduced Gravity Experiments to Advance CFD Boiling Models for Cryogenic Fluid Management Systems

Enabling Low-Cost, Autonomous Recovery of Small Payloads from Low Earth Orbit

Microgravity Test of Autonomous Multiple Cycle Farming System

Enhancing Sub-orbital Tech Advancement through Automated Control of High-def Video Systems

Glass Alloy Manufacturing Machine - Acoustic Levitation Furnace (GAMMA-ALF)

Autonomous Robot Swarms for Lunar Orbit Servicing and Space Asset Assembly

Preparations for a Suborbital Evaluation of a Human Tended Surgical Fluid Management System

CubeSounder: Flying a Novel 3D Weather Imaging Sensor on a High-Altitude Balloon

Platform Type

Status

Selection Date

Technology Areas