Showing 13 technologies
Browse All »
-
Fuel Optimal Large Divert Guidance for Planetary Pinpoint Landing (G-FOLD)
PI: Behcet Acikmese, NASA/Jet Propulsion Laboratory- 2 sRLV
-
Demonstration of Vertically Aligned Carbon Nano-tubes for Earth Climate Remote Sensing
PI: H. Todd Smith, Johns Hopkins University / Applied Physics Lab- 0 sRLV
-
Facility for Microgravity Research and Submicroradian Stabilization using sRLVs
PI: Scott Green, Controlled Dynamics Inc.- 7 sRLV
-
Autonomous Flight Manager for Human-in-the-Loop Immersive Simulation and Flight Test of Terrestrial Rockets
PI: Rick Loffi, Draper Laboratory Inc.- 0 sRLV
-
Demonstration of Variable Radiator (DoVR)
PI: Richard "Cable" Kurwitz, Texas A&M Engineering Experiment Station- 2 Parabolic
- 0 sRLV
-
Design and Development of a Micro Satellite Attitude Control System
PI: Manoranjan Majji, State University of New York - Buffalo- 1 Parabolic
- 0 sRLV
-
Suborbital Test of a Robotics-Based Method for In-Orbit Identification of Spacecraft Inertia Properties
PI: Ou Ma, New Mexico State University- 2 sRLV
-
Saturated Fluid Pistonless Pump Technology Demonstrator
PI: Ryan Starkey, University of Colorado - Boulder- 0 sRLV
-
Electric-hydrodynamic Control of Two-Phase Heat Transfer in Microgravity
PI: Boris Khusid, New Jersey Institute of Technology- 0 sRLV
-
A Field Programmable Gate Array (FPGA) -based, Radiation Tolerant, Reconfigurable Computer System with Real Time Fault Detection, Avoidance, and Repair
PI: Brock LaMeres, Montana State University - Bozeman- 2 sRLV
Platform Type
< All Platform Types- sRLV (13)
Status
Selection Date
< All Selection DatesTechnology Areas
- TA01 Launch Propulsion Systems (2)
- TA04 Robotics, Tele-Robotics and Autonomous Systems (2)
- TA08 Science Instruments, Observations and Sensor Systems (2)
- TA09 Entry, Descent and Landing Systems (3)
- TA10 Nanotechnology (1)
- TA11 Modeling, Simulation, Information Technology and Processing (1)
- TA12 Materials, Structures, Mechanical Systems and Manufacturing (1)
- TA14 Thermal Management Systems (3)