Showing 10 technologies
Browse All »
-
Heat Pipe Limits in Reduced Gravity Environments
PI: Marc A. Gibson, NASA/Glenn Research Center- 3 Parabolic
-
On the performance of a nanocatalyst-based Direct Ammonia Alkaline Fuel Cell (DAAFC) under microgravity conditions for water reclamation and energy applications
PI: Carlos Cabrera, University of Puerto Rico - Rio Pedras- 2 Parabolic
-
Testing the Deployment and Rollout of the Deployable for Recovery through Atmospheric Gravity Entry (DragEN) Electrodynamic Tether for CubeSats
PI: Jason Held, Saber Astronautics Australia Pty. Ltd.- 2 Parabolic
-
Creation of Titanium-Based Nanofoams in Reduced Gravity for Dye-Sensitized Solar Cell Production
PI: Kristen Scotti, Northwestern University - Evanston- 2 Parabolic
-
Suborbital Flight Experiment Monitor-2 (SFEM-2)
PI: Kathryn M. Hurlbert, NASA/Johnson Space Center- 3 sRLV
-
Ground-Based Study of Gravity Effects on Flow Boiling Heat Transfer in Preparation for an ISS Flight Experiment
PI: Jungho Kim, University of Maryland - College Park- 2 Parabolic
-
Rapid Calibration of Space Solar Cells in Suborbital Environments
PI: Justin Lee, The Aerospace Corporation- 3 Balloon
-
Gravity Effects on Flow Boiling Heat Transfer Using Temperature Sensitive Paints in Preparation for an ISS Flight Experiment
PI: Jungho Kim, University of Maryland - College Park- 1 Parabolic
-
Triboelectric Nano Generator (TENG) for Mars Exploration and High Altitude Power Generation on Earth
PI: Meyya Meyyappan, NASA/Ames Research Center- 0 Balloon
Platform Type
Status
Selection Date
- REDDI-F1-17A (Nov 2017) (2)
- REDDI-F1-16B (Jan 2017) (1)
- NASA Internal (Jul 2016) (1)
- REDDI-F1-16 (Jul 2016) (1)
- AFO6 (Jun 2013) (2)
- AFO5 (Jan 2013) (1)
- AFO1 (May 2011) (1)
- NASA Directed (1)